Human Resources
CLICK ON A BUTTON BELOW TO VIEW
JOB REQUIREMENTS
Click here to return to main
Job openings page
Fort Walton Machining
Job Description
Email Resume: mdial@fwmachining.com
Job Title: CNC Programmer
Department: CNC
Reports To: Lee Minor
FLSA Status: non-exempt
Prepared By: Marilyn Dial
Prepared Date: 12/22/05
Approved By:
Approved Date:
Summary:
Plans numerical control program to control contour path machining
of parts on automatic machine tools by performing the following
duties.
Essential Duties and Responsibilities include the following.
Other duties may be assigned.
~Analyzes drawings, sketches, and design data of part to determine
dimension and configuration of cuts, selection of cutting tools,
and machine speeds and feed rates.
~Determines reference points and direction of machine cutting
paths.
~Computes angular and linear dimensions, radii, and curvatures,
and outlines sequence of operations required to machine part.
~Prepares geometric layout on graph paper or using computer-assisted
drafting software to show location of reference points and direction
of cutting paths.
~Writes instruction sheets and cutter lists to guide setup
and operation of machine.
~Writes program of machine instructions in symbolic language
to encode numerical control tape or direct numerical control
database to regulate movement of machine along cutting path.
~Compares encoded tape or computer printout with original program
sheet to assure accuracy of machine instructions.
~Revises program to eliminate instruction errors or omissions.
~Observes operation of machine on trial run to prove programmed
instructions.
~Supervisory Responsibilities
~This job has no supervisory responsibilities.
Competencies:
To perform the job successfully, an individual should demonstrate
the following competencies :
Analytical - Synthesizes complex or diverse information; Collects
and researches data; Uses intuition and experience to complement
data; Designs work flows and procedures.
Design - Translates concepts and information into images; Uses
feedback to modify designs; Demonstrates attention to detail.
Problem Solving - Identifies and resolves problems in a timely
manner; Gathers and analyzes information skillfully; Develops
alternative solutions; Works well in group problem solving situations;
Uses reason even when dealing with emotional topics.
Project Management - Communicates changes and progress.
Technical Skills - Shares expertise with others.
Interpersonal Skills - Focuses on solving conflict, not blaming;
Listens to others without interrupting; Keeps emotions under
control; Remains open to others' ideas and tries new things.
Teamwork - Balances team and individual responsibilities; Exhibits
objectivity and openness to others' views; Gives and welcomes
feedback; Contributes to building a positive team spirit; Puts
success of team above own interests; Able to build morale and
group commitments to goals and objectives; Supports everyone's
efforts to succeed.
Judgement - Displays willingness to make decisions; Exhibits
sound and accurate judgment; Supports and explains reasoning
for decisions; Includes appropriate people in decision-making
process; Makes timely decisions.
Motivation - Demonstrates persistence and overcomes obstacles.
Planning/Organizing - Uses time efficiently; Plans for additional
resources. Able to work on several projects at one time.
Professionalism - Approaches others in a tactful manner; Reacts
well under pressure; Treats others with respect and consideration
regardless of their status or position; Accepts responsibility
for own actions.
Quality - Demonstrates accuracy and thoroughness; Looks for
ways to improve and promote quality; Applies feedback to improve
performance; Monitors own work to ensure quality.
Quantity - Meets productivity standards; Completes work in
timely manner; Strives to increase productivity; Wor Quantity
- Meets productivity standards; Completes work in timely manner;
Strives to increase productivity.
Safety and Security - Observes safety and security procedures;
Determines appropriate action beyond guidelines; Reports potentially
unsafe conditions ; Uses equipment and materials properly.
Adaptability - Adapts to changes in the work environment; Manages
competing demands; Changes approach or method to best fit the
situation; Able to deal with frequent change, delays, or unexpected
events.
Attendance/Punctuality - Is consistently at work and on time;
Ensures work responsibilities are covered when absent.
Dependability - Follows instructions, responds to management
direction; Takes responsibility for own actions; Commits to
long hours of work when necessary to reach goals.; Completes
tasks on time or notifies appropriate person with an alternate
plan.
Initiative – Undertakes self-development activities:
Looks for and takes advantage of opportunities; Asks for and
offers help when needed.
Innovation – Displays original thinking and creativity;
Meets challenges with resourcefulness; Generates suggestions
for improving work; Develops innovative approaches and ideas;
Presents ideas and information in a manner that gets others’
attention. Applys creative applications methodology for cutting
of complex geometry.
Qualifications To perform this job successfully, an individual
must be able to perform each essential duty satisfactorily.
The requirements listed below are representative of the knowledge,
skill, and/or ability required. Reasonable accommodations may
be made to enable individuals with disabilities to perform the
essential functions.
Education and/or
Experience:
High school diploma or general education degree (GED). Minimum
5 or more years experience in programming a job shop environment.
Must have a strong understanding of basic machine principles
and be able to program and machine a part if needed.
Language Skills:
Ability to read and interpret documents such as safety rules,
operating and maintenance instructions, and procedure manuals.
Ability to write routine reports and correspondence. Ability
to speak effectively before groups of customers or employees
of organization.
Mathematical Skills:
Ability to apply concepts of basic algebra and geometry. Good
working knowledge of geometric dimensioning and tolerancing
required and be able to work in both Metric and English units.
Reasoning Ability:
Ability to apply common sense understanding to carry out instructions
furnished in written, oral, or diagram form. Ability to deal
with problems involving several concrete variables in standardized
situations.
Computer Skills:
To perform this job successfully, an individual must have experience
in 2 and 3 axis programming in Master Cam and basic understanding
of 4 and 5 axis programming is preferred.
Other Skills and
Abilities:
Must have trouble shooting skills for tool deflection and chatter;
able to maximize cutting speeds and feeds to prolong cutter
life and reduce run time; able to use micrometers, depth gages
and calipers and have good fundamentals of plate inspection
layout..
Other Qualifications:
Must have own tools. Must also be willing to work 1st, 2nd and
3rd shifts.
Physical Demands The physical demands described here are representative
of those that must be met by an employee to successfully perform
the essential functions of this job. Reasonable accommodations
may be made to enable individuals with disabilities to perform
the essential functions.
While performing the duties of this Job, the employee is regularly
required to stand; use hands to finger, handle, or feel; reach
with hands and arms; stoop, kneel, crouch, or crawl and talk
or hear. The employee is frequently required to walk. The employee
is occasionally required to climb or balance. The employee must
regularly lift and /or move up to 10 pounds, frequently lift
and/or move up to 50 pounds. Specific vision abilities required
by this job include close vision, peripheral vision, depth perception
and ability to adjust focus.
Work Environment The work environment characteristics described
here are representative of those an employee encounters while
performing the essential functions of this job. Reasonable accommodations
may be made to enable individuals with disabilities to perform
the essential functions.
While performing the duties of this Job, the employee is regularly
exposed to moving mechanical parts; fumes or airborne particles;
risk of electrical shock and vibration. The noise level in the
work environment is usually moderate.
