CNC Milling Department

• (1) HAAS VMC - VR11
  
  Axis: 5
  Capacity: 20HP, 7.5K RPM Gearbox
  Table: 120" x 28"
  Travel: 120" x 40" x 30"
  Accuracy: ±.0002

• (5) Mazak Vertical Nexus 510C-HS
  
  Axis: 3
  Capacity: 40HP, 15K, 1968 IPM
  Table: 51.1" x 21.6"
  Travel: 41.3" x 20" x 20"
  Accuracy: ±.0001

• (2) HAAS VMC - VF9
  
  Axis: 5 - With Trunion & Indexer
  Capacity: 20HP, 10K RPM Gearbox
  Table: 84" x 38"
  Travel: 86" x 40" x 30"
  Accuracy: ±.0002

• (2) Mazak Vertical Nexus 510C
  
  Axis: 3
  Capacity: 25HP, 12K, 1417 IPM
  Table: 41.3" x 20"
  Travel: 41.3" x 20" x 20"
  Accuracy: ±.0001

• (1) HAAS VMC - VR8
  
  Axis: 5
  Capacity: 30HP, 10K RPM w/Glass Scales
  Table: 84" x 28"
  Travel: 80" x 40" x 36"
  Accuracy: ±.0002

• (1) Mazak HCN 4000-II
  
  Axis: 3
  Capacity: 40HP, 18,000 RPM, Rapid Trav. 2363 IPM
  40 Tool Magazine
  Travel: 22" x 24.8" x 25.2"
  Accuracy: ±.0004

• (1) HAAS VMC - VF7
  
  Axis: 5 - With Trunion & Indexer
  Capacity: 30HP, 10K RPM w/Glass Scales
  Table: 84" x 28"
  Travel: 84" x 32" x 30"
  Accuracy: ±.0001

• (2) Mazak VARIAXIS 630-5X II    
  
  Axis: 5
  Capacity: 15HP, 12,000 RPM, 40 Tool Magazine
  A-Tilt: -120° to 30°, C-Rotate: ±360°
  Table Load: 1100 lbs
  Travel: X:24.80", Y: 30.12", Z: 20.08
  Accuracy: ±.0001 Positional

• (2) HAAS VOP-D - VF4
  
  Axis: 5 - With Trunion & Indexer
  Capacity: 20HP, 10K RPM w/Linear Scales
  Table: 50" x 20"
  Travel: 50" x 20" x 25"
  Accuracy: ±.0001

• (2) Mazak VARIAXIS 500-5X II    
  Axis: 5
  Capacity: 30HP, 12,ooo RPM, 40 Tool Magazine
  Table: 19.69" x 15.75", Rotates 360°
  Travel: TBD
  Accuracy: ±.0001 Positional

• (1) HAAS VMC - VF3
  
  Axis: 4 - With Indexer
  Capacity: 20HP, 10K RPM w/Glass Scales
  Table: 48" x 18"
  Travel: 40" x 20" x 25"
  Accuracy: ±.0001

• (1) Mazak VTC-300C    
  
  Axis: 3
  Capacity: 20HP, 24 Tool, HS Gearbox & Probing
  Table: 30" x 65"
  Travel: 65" x 30" x 30"
  Accuracy: ±.0002

• (1) HAAS VMC - VF5-50 Taper
  
  Axis: 5 - With Trunion & Indexer
  Capacity: 20HP, 10K RPM w/ Linear Scales
  Table: 52" x 23"
  Travel: 50" x 26" x 25"
  Accuracy: ±.0001

• (1) Mazak VTC-41M
  
  Axis: 4
  Capacity: 15HP, 10K RPM, 24 Station
  Table: 60" x 16"
  Travel: 44" x 16" x 20"
  Accuracy: ±.0002

• (1) HAAS EC-400 w/ Tombstones
  
  Axis: 4 w/ Thru Spindle Coolant
  Capacity: 20HP, 12K RPM w/Linear Scales
  Table: 15.75" x 15.75"
  Travel: 20" x 20" x 20"
  Accuracy: ±.0001 Repeatability
  Accuracy: ±.0002 Positional

• (1) Bridgeport VMC1000XP²
  
  Axis: 4
  Capacity: 25HP, 12K RPM, 1,770 IPM
  Table: 44.25" x 22.5"
  Travel: 40" x 24" x 24"
  Accuracy: ±.0002

• (1) HAAS EC-500 w/ Cluster Towers
  
  Axis: 4 w/ Thru Spindle Coolant
  Capacity: 30HP, 12K RPM w/Linear Scales
  Table: 15.75" x 15.75"
  Travel: 32" x 20" x 28"
  Accuracy: ±.0001 Repeatability
  Accuracy: ±.0002 Positional

• (2) Fanuc Robodrill T10
  
  Axis: 4
  Capacity: 7.5HP
  Table: 34" x 12"
  Travel: 18" x 12" x 6"
  Accuracy: ±.0002

• (2) HAAS Super Mini-Mill
  
  Axis: 3
  Capacity: 15HP,10K RPM (1) w/ Thru Spindle Coolant
  Table: 36" x 12"
  Travel: 16" x 12" x 10"
  Accuracy: ±.0001

• (1) Daewoo Diamond Series DM 50/25
  
  Axis: 3
  Capacity: 25HP, 50 Taper
  Table: 25" x 50"
  Travel: 52" x 25" x 25"
  Accuracy:±.0001

• (1) Daewoo Diamond Series DM 40/20
  
  Axis: 3
  Capacity: 25HP, 50 Taper
  Table: 20" x 40"
  Travel: 40" x 20" x 24"
  Accuracy:±.0001

• (1) Kitamura MyCenter 2x
  
  Axis: 3
  Capacity: 15HP, 10K RPM w/Pallet Changer
  Table: 11.8" x 19.7"
  Travel: 20" x 14" x 18"
  Accuracy: ±.0001

• (1) Bridgeport VMC 1000, DX-32
  
  Axis: 3
  Capacity: 15HP, 22 Station, 10K RPM, 1280 IPM
  Table: 48" x 22"
  Travel: 40" x 20" x 20"
  Accuracy: ±.0005

• (1) Cincinnati Milacron Arrow 2
  
  Axis: 3
  Capacity: 22HP, w/Glass Scales, 30Station, 8K RPM
  Table: 26" x 58"
  Travel: 40" x 20" x 20"
  Accuracy: ±.0001

• (1) CMS MC6000 3D CAD/CAM Extrusion Milling Center
  
  Axis: 3
  Capacity: 5.3 HP, Variable Speed 12K RPM
  Automated 0°, 90°, & 180° Spindle Head Settings
  Table: 24" x 137"
  Travel: 137" x 24" x 13"
  Accuracy: ±.002

Wire EDM

• (1) Fanuc EDM Model aOiA
  
  Axis: 3
  Capacity: 28in² / Hour Cut Speed
  Table: 12.6" x 8.7"x7.1" X,Y & Z Axis
  Travel: 26" x 17" x 10"
  Accuracy: ±.0001

• (1) Fanuc EDM Model a0iC w/180iS-WB
  
  Axis: 3
  Capacity: 28in² / Hour Cut Speed
  Table: 12.6" x 8.7"X7.1" X,Y & Z Axis
  Travel: 26" x 17" x 10"
  Accuracy: ±.0001

• (1) Fanuc EDM Model a-1iC w/180iS-WB Controller
  
  Axis: 3
  Capacity: 28in² / Hour Cut Speed
  Travel: 21.7" x 14.6" x 16.1"
  Accuracy: ±.0001

• (1) Fanuc HM400T HoleMaster
  
  Axis: 3 w/ Futaba DRO & Glass Scales
  Capacity: 850 lbs Max Work piece Weight
  Table:20" x 20"
  Travel: 16" x 16" in X/Y
  Accuracy: ±.0001

WaterJet Machining Center

• (1) Omax 2652 Integrated CAD/CAM
  
  Axis: 3
  Capacity: 3" Thick All Materials
  Table: 69" x 30"
  Travel: 52" x 26"
  Accuracy: ±.003

• (2) Omax 80160 Integrated CAD/CAM
  
  Multiple Cutting Heads (2 Per Unit)
  Capacity: 3" Thick All Materials
  Speed: 200 i.p.m.
  Table: 174" x 91"
  Travel: 168" x 80"
  Accuracy: ±.002

Conventional Milling Machines

• (1) Chevalier Falcon Pro
  
  Axis: 2.5
  Capacity: 5HP, Prototype Machine, Conversational
  Table: 10" x 50"
  Travel: 16" x 27"
  Accuracy: ±.001

• (1) Bridgeport Series 2
  
  Axis: N/A
  Capacity: 3HP Variable Speed
  Table: 10" x 50"
  Travel: 31" x 15"
  Accuracy: ±.001

• (6) Sieki X-L (DRO)
  
  Axis: N/A
  Capacity: 3HP Variable Speed
  Table: 10" x 50"
  Travel: 31" x 15"
  Accuracy: ±.001

• (2) Sharp VH-25
  
  Axis: N/A
  Capacity: 3HP Variable Speed
  Table: 10" x 50"
  Travel: 31" x 15"
  Accuracy: ±.0001

CNC Lathe Department

• (1) Daewoo Puma 250 MS
  
  Powerful 30 hp high-torque main spindle drive w/ full “C” axis
  Maximum travel of 21” x 11”
  Large 3” bar capacity
  High Speed 3500 RPM Spindle
  Fast 0.2 Second turret indexing
  Fast 945 IPM rapid traverse
  Up to 4,673 lbs of Z axis thrust
  Live Tooling w/Sub Spindle

• (1) Daewoo Lynx 210
  
  15 HP main spindle drive
  Large 2.5” bar capacity
  Fast 4,500 RPM spindle
  Fanuc 21TB control
  Accuracy of ±.0001
  Maximum turning diameter of 11.0”
  Maximum Travel of   21” x 6.5”
  Maximum turning length of 20.0”
  Bar feeder
  Turbo Chip Conveyor
  S26H collet chuck
  Factory installed part catcher

• (2) Doosan Puma 240M
  Axis: 2
  Capacity: 22 HP 2 Speed Trans. 22" Swing, 80" Bed
  Travel: 4" Bore
  Accuracy: ±.0002

• (1) Daewoo P240A
  
  Axis: 2
  Capacity: 15 HP 980 IPM
  Travel: 21" x 6.5"
  Accuracy: ±.0001

• (1) Milltronics ML22-80
  
  Axis: 2
  Capacity: 22 HP 2 Speed Trans. 22" Swing, 80" Bed
  Travel: 4" Bore
  Accuracy: ±.0002

• (1) Mazak QTN-250M
  
  Axis: 2
  Live Tooling - 10" Chuck & 26.5" Swing
  Conversational Programming
  Capacity: 30 HP
  Accuracy: ±.0002

• (1) Hitachi Seiki -Hitec 20SII
  
  Axis: 2
  Capacity: 20 HP 945 IPM
  Travel: 15" x 8"
  Accuracy: ±.0002

Conventional Lathe Department

• (1) Sharp 1440V Lathe
  
  Capacity: 3 HP Variable Speed
  Table: 7" x 40"
  Accuracy: ±.001

• (2) Hardinge Lathes
  
  Model: HLV-H, 1.5 HP
  Capacity: Ø1.5 Through Spindle

Drill Presses

• (3) Powermatic Drill Press
• (1) Milwaukee Magnetic Drill

Grinding / Honing

• SuperTECH G38P - 150 Universal CNC Cylinder Grinder
• Chevalier, FSG-618
• K.O. Lee Tool & Cutter Grinder
• Clausing CSG-3A1224

Sheetmetal Fabrication

• Bystronic AFM, EP 10-180
  
  Axis: 5
  Capacity: 180 Ton
  Table: 120"
  Travel: 24"
  Accuracy: ±.0004

• Birlik-Makina, SRD-4-160 Plate Bending Roll
  
  Axis: N/A
  Capacity: 1/4" Thick Aluminum
  Table: 4'
  Travel: N/A"
  Accuracy: ±.005

• Atlantic Press Brake
  
  Axis: N/A
  Capacity: 60 Ton
  Table: 80"
  Travel: 24"
  Accuracy: ±.005

• Amrox 1/2 Ton Press
• Wysong Shear - 3/8" Thick Alum, 60" Table, Accurate to ±.005
• BayKal Shear - 8' Wide
• OTC Hydraulic Press - 100 Ton

Saw Department

• Marvel V-10A, Vertical Full Auto, 45° Mitre

• Hyd-Mech Full Auto Saw - S23A

• WellSaw - Band Saw

• Do-All 2013-V, Band Saw

• Peerless HB 711A, Horizontal Saw

Welding Department

• Ultima 150 - Plasma Welder (w/ 70 Degree Hand Torch)

• Miller 250 Syncrowave Heli-Arc TIG Welder

• Miller Aerowave Heli-Arc TIG Welder

• Oxy - Acetylene  Set Up, Used for Cutting & Heating

• Corbamatic 250 MIG

• (2) Platen Tables 5'x5'

• Jetline Engineering Inert Gas Atmosphere Welding Chamber
  Certified to MIL-STD-2219, MIL-STD-248, MIL-W-22248 & M.D.A. PS22201

Heat Treat Equipment

• (1) Sybron Thermolyne Furnace
• (1) Wyatt Oven
• (1) Custom Oven

Metal Finishing

• Alliance Manufacturing Parts Washer

• Tumbler, 6 Cubic Foot Bowl Type

• (2) Tumbler, 8 Cubic Foot Bowl Type

• Tumbler, 1 Cubic Foot Bowl Type

• Grit Blast Cabinet

• Bench Grinders

• Time Saver

• Polishing Buffers

• Air Compressors

• Air Dryers

CAD & CAM Equipment

• Catia Version 5 Release 11
• Pro-Engineer used with Pro-Intralink PDM
• AutoCAD
• Inventor w/ Autodesk Vault for Revision Control
• Master CAM w/ 5-Axis Programming
• EZ-Mill
• EZ-Turn

Laser Marking Equipment

• Alase Technologies - Laser Marking / Engraving System
  20 Watt - YAG Laser
  Table Size: 8" x 8"
  

QA Inspection Department

• Climate Controlled Quality Assurance Lab
  

• Browne & Sharpe PFX 4-5-4 - Validator
  
  17" x 19" x 11", CNC DCC

• Starrett HGC 2018-16 CNC Controlled CMM
  
  21" x 21" x 13"
  Metronics QC 5000, MH8 Renishaw, TP20 Probe, CNC DCC

• Brown & Sharpe 575 - Global Performance
  CNC DCC

• Mitutoyo Crysta Apex 9166 CNC CMM
  
  36" x 80" x 24", MCOSMOS MCAT-C2, PH10MQ Renishaw, TP200 Probe, CNC DCC

• OGP, Inc. QL-30 High Capacity Contour Projector (15" x 18" x 9")
• Scherr-Tumico Industries Model 20-3500 Optical Comparator
• Mitutoyo Digital Height Stands
• Calibrated Thread Plugs
• Ring Gages
• Various Precision Hand Tools

• Microview Model-H14 Computerized Profile & Surface Optical Comparator
• Wilson/Rockwell Model 40UR Hardness Tester
• Mitutoyo Digital Height Master
• Inspection Grade Surface Plates
• Zoller Tool Setter & Tool Inspection System